SA and SE grooving systems

Cut out the competition
with certainty.

Extremely efficient and flexible for parting off and grooving diameters up to 140 mm: the ARNO SA grooving system.

When it comes to efficiency, our SA system is almost unbeatable for parting off and grooving. The rigid insert clamping guarantees maximum process reliability. It’s even better in combination with our patented ACS – ARNO Cooling System:
it helps you to achieve an average of 300 per cent longer tool life in your grooving operations and can increase speed – even with narrow part-off operations or materials which are difficult to machine.

The versatile addition to parting off, grooving and copy turning: the ARNO SE groove turning system.

The SE groove turning system is your flexible solution for grooving operations and Swiss type turning. It offers absolute rigidity to withstand high shear loads. Workpieces with a big radius can also be machined. The SE system is also convincing as it is so simple to handle and it offers long tool life – especially when combined with ACS1 which gets the coolant underneath the swarf.

SA and SE monoblock holders

Rigid for reliable processes

Easy to use – only one replacement part on the monoblock holder

Precise cutter positioning by active insert clamping with fixed stops

Impossible to pull the insert out (SE)

Available for SA shanks: 8 x 8 to 32 x 32, SE: 12 x 12 to 25 x 25 mm

Available for SA groove widths: 1.5 to 10 mm, SE: 2 to 6 mm

Special for Swiss type turning: simple and fast tool change with the AFC – ARNO Fast Change holders. Go to  www.arno.de/langdrehen for more details

SA grooving blades

Ideal for narrow and deep parting off and grooving

Precise and rigid insert positioning thanks to active insert clamping

Available in sizes of 26 to 32 mm and groove widths of 1.5 to 4 mm

SA modules

Rigid and narrow – perfect combination of grooving blade and monoblock holder

Perfect in combination with ARNO flange mounted holders

Available for cutting depths of 10 to 70 mm and groove widths of 1.5 to 4 mm

Inserts

Efficient with two cutting edges

Precise and cost-efficient due to directly pressed special geometries or ground to high precision

Equipped with many geometries and grades for every application

ACS – ARNO Cooling-System

Tool life longer by an average of 300%

Simple – precise coolant hole feed without the need for manual adjustment

ACS1 for SA and SE: Coolant under the swarf for maximum cooling effect

ACS2 for SA: additional tool flank cooling to optimise chip breakage

Flange mounted holders for SA

Maximum rigidity by perfect matching to machine (types)

Flexible – for monoblock holders, grooving blades or modules, with normal or upside down assembly

For grooving ranges of 20 to 140 mm and groove widths of 1.5 to 6 mm

SA and SE monoblock holders

Rigid for reliable processes

Easy to use – only one replacement part on the monoblock holder

Precise cutter positioning by active insert clamping with fixed stops

Impossible to pull the insert out (SE)

Available for SA shanks: 8 x 8 to 32 x 32, SE: 12 x 12 to 25 x 25 mm

Available for SA groove widths: 1.5 to 10 mm, SE: 2 to 6 mm

Special for Swiss type turning: simple and fast tool change with the AFC – ARNO Fast Change holders. Go to  www.arno.de/langdrehen for more details

SA grooving blades

Ideal for narrow and deep parting off and grooving

Precise and rigid insert positioning thanks to active insert clamping

Available in sizes of 26 to 32 mm and groove widths of 1.5 to 4 mm

SA modules

Rigid and narrow – perfect combination of grooving blade and monoblock holder

Perfect in combination with ARNO flange mounted holders

Available for cutting depths of 10 to 70 mm and groove widths of 1.5 to 4 mm

Inserts

Efficient with two cutting edges

Precise and cost-efficient due to directly pressed special geometries or ground to high precision

Equipped with many geometries and grades for every application

ACS – ARNO Cooling-System

Tool life longer by an average of 300%

Simple – precise coolant hole feed without the need for manual adjustment

ACS1 for SA and SE: Coolant under the swarf for maximum cooling effect

ACS2 for SA: additional tool flank cooling to optimise chip breakage

Flange mounted holders for SA

Maximum rigidity by perfect matching to machine (types)

Flexible – for monoblock holders, grooving blades or modules, with normal or upside down assembly

For grooving ranges of 20 to 140 mm and groove widths of 1.5 to 6 mm

profitable advantagesof ARNO SA and SE grooving systems

Tool life longer by an average of 300% – with ACS – ARNO Cooling System

Average of three times more productivity

Reliable processes at maximum productivity

Outstanding
services inclusive

Any questions? Contact your personal ARNO contact person:

Write now Or Call +44 01785 850 072 ARNO (UK) Limited
Unit 9, 10 & 11, Sugnall Business Centre
Sugnall, Eccleshall Staffordshire | ST21 6NF